Residential Products
 Heat Recovery
 Multi Point Extract
MEVAC and MEVDC
MEV-SVS Supply and Extract
How does MEV work
Acoustic Ventilator
 Bathroom Extract
 Kitchen Extract
 Positive Input Ventilation
 Installation Ancillaries
 Applications
 Renewables
 Commercial Products
 OEM Products
 Self Build
 Discontinued Products

Residential Products -> Multi Point Extract ->
Ecosmart MEV

The ultimate unit for MEV systems

The MEV-ECOSMART features unrivalled low noise levels, state of the art low energy fan/motor technology, unique controls and integral mounting bracket, individual room combined duct connection spigot and volume control damper and a fan protection filter. All these features are contained in a compact, low profile casing. In short, MEV-ECOSMART really is the very best of its type available.

Why MEV?

Today’s modern apartment buildings offer challenges to the ventilation system designer. Limiting noise ingress, wind effects, aesthetics and installation limitations have to be taken into account in addition to regulatory compliance and cost. MEV has less dependency on background ventilators, requires only a single discharge grille for a whole apartment and very often has smaller, easier to install ducts than systems designed around intermittent operating extract fans and background vents. Such benefits make MEV an increasingly popular method of providing adequate ventilation in such homes.

How does it work?

Essentially the concept is to provide simultaneous, low level extraction from Kitchens, Bathrooms, Shower rooms, Utility rooms and WC’s to a central extract fan via a system of ductwork and grilles. The extracted air is then normally discharged to outside via a single duct and grille/cowl. Current Building regulation guidance, in the form of BRE Digest 398, requires such systems be designed to provide background extraction at a rate equating to approximately 0.5 air changes per hour based on the whole dwelling volume with the ability to boost by 25-50% for times when increased ventilation is required e.g. during cooking. Replacement air is normally able to be provided via structural air leakage with background ventilation openings like trickle vents not normally needed unless the home is built to extraordinarily airtight standards. This can be best demonstrated by referring to the table below which shows the very small building fabric air resistance an MEV system on boosted extraction would have to overcome in apartments of different levels of airtightness. As this type of system has to work 24 hours a day, 7 days a week, 365 days a year, low noise levels and reliability are critical.

Unique controls and status indication

The units control panel allows the units "background" and "boost" airflow to be set as required and the unique constant volume control facility will ensure the set airflows are achieved and maintained. The fan status light can also be used to provide indication that the installed unit is achieving the duties set.

 Relevant Literature & Documents


 

Brochure:
Ventilation Solutions for Schools, Academies, Colleges and Universities

File size: 1.6 MB

 

Installation and Maintenance Manual:
MEV Ecosmart Continuous Mechanical Extract Ventilation Units
Leaflet Number: 671266 - Jul-07

File size: 201 KB

 

Link to page:
Residential Product Applications

You will require Adobe Reader to view the above PDF () documents. Get Adobe Reader